Streamlines the mixing, viscosity control, and chemical blending of polymer-based fireproof wrapping compounds under precise thermal monitoring.
Measures particle concentrations and smoke density generated during the combustion testing of electrical insulation and protective wraps.
Classifies aerodynamic particle size distributions of off-gassed particulates during simulated high-voltage cable fire scenarios.
Automates the extraction and cleanup of toxic fire-retardant residues and environmental hazards from tested wrapping materials.
Electrical equipment fireproof wrapping is critical to preserving infrastructure integrity across power grids, heavy manufacturing plants, and high-density data centers. In the event of an electrical short circuit or overload, these specialized wraps—often composed of advanced intumescent materials, ceramic fibers, or silicone elastomers—act as the primary barrier preventing catastrophic fire spread. However, developing materials that meet stringent global standards (such as UL 1479, ASTM E814, and international toxicity regulations) requires rigorous chemical formulation, thermal stability screening, and toxic gas profiling.
This is where Chemistry Lab Automation becomes indispensable. Historically, testing the fire resistance, heat release rate, and aerosol emissions of fireproof wrapping was a slow, manual, and hazardous process. Modern automated laboratory systems now allow researchers to synthesize polymer formulations, simulate extreme thermal exposure, and capture volatile combustion products with unprecedented accuracy. By removing human error and protecting operators from toxic byproducts, automated chemistry systems accelerate the R&D cycle from years to weeks.
Intumescent wraps expand when exposed to heat, forming a thick carbonaceous char that insulates electrical cables. Finding the optimal ratio of acid sources, carbonific agents, and blowing agents requires testing hundreds of chemical combinations. Automated liquid and powder dispensing platforms enable high-throughput screening of these formulations, rapidly identifying compositions that offer the highest expansion ratio and thermal barrier efficiency.
When fireproof wrapping is subjected to flame, it must not release highly toxic or dense smoke that could blind occupants or damage nearby electronic control systems. Automated aerosol generators and multi-stage cascade impactors are deployed to simulate the exact heating curve of electrical failures. These systems capture and analyze the size distribution and chemical composition of the generated smoke particles in real-time.
Electrical wraps must remain functional for decades in harsh industrial environments. Automated environmental chambers subject wrapping samples to cyclic heat, humidity, UV exposure, and chemical vapors. Automated testing loops periodically measure chemical degradation, tracking plasticizer migration and flame-retardant leaching without requiring manual intervention.
Beijing HuirongheTechnology Co., Ltd., (overseas brand "HRHINS") founded in 2010 with a registered capital of 10 million yuan, is located in the Beijing Economic-Technological Development Area. The company specializes in the R&D, production, sales, and technical services for inhalation toxicity, genetic toxicity, inhaler testing, aerosol detection, and lab automation systems.
HRHINS has been recognized as a National High-tech Enterprise and designated as a Beijing Municipal Corporate Science and Technology R&D Institution. Additionally, it has received honors such as being a Beijing "Specialized, Refined, Unique, and Innovative" SME, a China Manufacturing Champion Enterprise, and a Beijing Intellectual Property Demonstration Enterprise.
Further accolades include being named a National Intellectual Property Advantage Enterprise in 2019, a National "Little Giant" SME (the first in the aerosol scientific instrument field) in 2022, and a recipient of the Second Prize in Scientific and Technological Progress from the Tianjin Municipal Government in 2022. The company occupies over 3000sqm of offices, R&D center and workshops.
HRHINS holds certifications for the ISO 9001:2015 Quality Management System, ISO 14001:2015 Environmental Management System, ISO 45001:2018 Occupational Health and Safety Management System, and GB/T 29490-2013 Intellectual Property Management System.
In 2018, HRHINS supported the establishment of the Respiratory Toxicology Committee of the Chinese Society of Toxicology and became its founding sponsor. That same year, the company also gained council membership in several prestigious organizations, including the Chinese Society of Toxicology, the Chinese Environmental Mutagen Society, and the Zhongguancun New Bio-pharmaceutical Industry Alliance.

HRHINS has developed over 60 innovative instruments, including aerosol generators, inhalation systems, fully automated QuEChERS system, multi-stage cascade impactor, and breathing simulator, etc.
The aerosol toxicity instrument line offers a complete suite for studies involving rats, mice, guinea pigs, ferrets, rabbits, dogs, and monkeys. Supported exposure methods are equally comprehensive, covering nose-head, whole-body, airborne infection, and in vitro cell culture exposures.
Crucially, all products—from aerosol generation and detection to sampling and system control—are based on independent intellectual property.
These solutions are widely employed by GLP laboratories, safety assessment centers, universities, research institutions, and hospital respiratory departments. Thanks to their superior quality and reliable after-sales support, our products have earned the trust of users both in China and internationally.
The integration of artificial intelligence (AI) and machine learning with lab automation is reshaping the development of fireproof wrapping for electrical machinery. Traditionally, predicting how a chemical compound reacts under thermal stress required physical testing of every single variation. By feeding automated test data—such as heat release rates, aerosol composition, and mechanical durability—into machine learning models, algorithms can now predict the performance of virtual formulation designs.
Furthermore, environmental safety regulations are pushing the industry away from halogenated flame retardants due to their bioaccumulative toxicity. The search for green, non-toxic alternatives requires exploring complex organic-inorganic hybrid matrices. Automated labs allow for rapid, unattended testing of these novel compounds, ensuring that new fireproof wraps are not only highly effective at stopping electrical fires but also environmentally benign and safe for human exposure.
By linking automated sample preparation (like the QuEChERS extraction system) directly with analytical chromatography and toxicity testing suites, researchers can quickly verify that no toxic degradation products are formed during high-temperature operations. This closed-loop automation represents the future of materials science in the safety sector.
Generates stable, reproducible test aerosols to evaluate the filtration efficiency and particle deposition on protective electrical wraps.
Assesses the physiological impact of combustion gases emitted from heated electrical cables and wrapping materials.
Automates extraction, vortexing, and centrifugation for chemical analysis of fireproof coating additives.
Classifies fine particulate matter released during electrical fire simulations to determine smoke inhalation risk profiles.
Simulates human respiration patterns to test emergency gear and evaluate air quality in environments containing cable fire smoke.
Evaluates the toxicity of airborne particulates from burnt wrapping materials directly on lung cell cultures.
Simulates extreme thermal environments to test the structural and chemical integrity of fire-retardant wraps.
Centralized platform for managing aerosol generation, monitoring environmental parameters, and logging test data.