Request a Quote
Leave Your Message

Single-Channel Intelligent Smoke Generator from China Suppliers - Factory Direct HRH-SM120 for ISO3308 & ISO4387 Compliance

Introducing the HRH-SM120 single-channel intelligent smoke generator, designed with precision motors and advanced control units to comply with the ISO3308 and ISO4387 smoke testing standards. Manufactured in China, this high-quality equipment is ideal for various applications, ensuring reliability and accuracy. As a leading supplier in the market, our factory guarantees exceptional performance and durability, making the HRH-SM120 an essential tool for smoke testing needs. Choose our products for dependable solutions from trusted Chinese suppliers!

    ⚙️Features

    • Load with two cigarettes simultaneously.
    • Smoke capacity: 15-60ml.
    • Smoke cycle: 10-240s.
    • Smoke curve: standard bell-shaped curve or other customized curves.
    • Measurement capacity accuracy: ±0.01 mL
    • Control capacity accuracy: ±0.01 mL
    • Measurement time accuracy: ±0.01 s
    • Control time accuracy: ±0.01 s
    • Puff duration: 3–60 s adjustable
    • Rated voltage: 220 V
    • Main unit weight: 5 kg
    • Main unit dimensions: 37 × 23 × 38 (cm)

    🌡️Environmental Specifications

    🔌Working Environment

    Temperature: 0 ℃–60 ℃
    Humidity: 5%–95% (non-condensing)

    📦Storage Environment

    Temperature: -20 ℃–70 ℃
    Humidity: 5%–95% (non-condensing)

    🔧Routine Maintenance

    • If the tar cannot be cleaned thoroughly after prolonged experiments, remove the syringe, pull out the plunger, and clean it with a soft test tube brush. After cleaning, apply an appropriate amount of Vaseline around the plunger base (the white front-end part) for lubrication.
    • The tubing used in this product is 4x6mm peristaltic pump tubing, with a hardness of approximately Shore 55A. During experiments, it shall be replaced regularly. Compliant tubing can be procured independently or purchased through our Company's sales department.
    • The maximum service life of the pinch valve used in this product is 10 million cycles. Replace it in advance to avoid affecting the experiment.

    🔄Pinch Valve Replacement Steps

    • Remove the silicone tubing from the pinch valve.
    • Use a hex wrench to remove the four screws.
    • Disconnect the wiring of the pinch valve (a plug-in terminal connector is used here; press the middle protrusion and pull firmly apart).
    • Finally, use a hex wrench to remove the screws on the pinch valve, and then remove the pinch valve.
    • Install the new pinch valve by following the reverse order of Steps 4-3-2-1.

    🔬Application Fields

    Applicable to various toxicology research centers, animal smoking poisoning tests, respiratory laboratories of hospitals, technical laboratories of cigarette factories for smoke research, etc.

    ❓Frequently Asked Questions

    How many cigarettes can the machine load at once?

    The machine is designed to load and test with two cigarettes simultaneously.

    What are the dimensions and weight of the main unit?

    The main unit weighs 5 kg and has dimensions of 37 × 23 × 38 (cm).

    What are the temperature and humidity requirements for the working environment?

    The working environment should maintain a temperature between 0 ℃ and 60 ℃, and humidity between 5% and 95% (non-condensing).

    How often should the tubing be replaced, and what is its specification?

    The tubing is 4x6mm peristaltic pump tubing (hardness approx. Shore 55A) and must be replaced regularly. Replacement tubing can be purchased independently or through our sales department.

    What is the lifespan of the pinch valve and how do I replace it?

    The pinch valve has a maximum service life of 10 million cycles. It should be replaced in advance by removing the silicone tubing, unscrewing the hex screws, disconnecting the plug-in terminal connector, and mounting the new valve in reverse order.

    Where is this equipment typically applied?

    It is widely used in toxicology research centers, animal smoking poisoning tests, hospital respiratory laboratories, and cigarette factory technical labs for smoke research.

    Make An AppointmentLEAVE YOUR MESSAGE